HLS外半導體層電纜剝皮器AV6400
尺寸:250×160×55mm
重量:600g
應用范圍16 – 41 mm
剝除厚度0 – 2 mm
建議適用非硫化剝離半導電層
外半導體層剝離工具
技術特點：
適用于中高壓XLPE 交聯聚乙烯電纜，可剝除外半電層；
可縱切、螺旋形切及環切, 縱向切剝?nèi)缤瑒兿憬缎问剑?/span>
定位夾可固定電纜，確定剝離的長度；
逐步調節深度，最大可旋轉直徑130 mm；
刀片可調整深度最大2 mm，
調整旋鈕刻度為0-0.9 mm，
每個刻度進刀為0.1 mm；
縱切口開始位置可以精確對準。
可以在有限的空間減少旋轉；
完美的環形切割；
表面以下無切口.
注意：不適合帶電作業
標準配置：
·HLS 電纜剝皮：AV6410
·固定夾：AV6411
·矽膠潤滑劑：AG1013
·工具箱：AB6400
HLS semiconductor layer cable stripping device AV6400
Size: 250 x 160 x 55mm
Weight: 600g
The application range of 16 - 41 mm
Peeling thickness of 0 - 2 mm
Suggestions for non sulfide stripping semi conductive layer
The outer semiconductor layer stripping tool
Technical characteristics:
Suitable for medium and high voltage XLPE XLPE cable, strippable except semi layer;
Can the slitting, spiral cutting and ring cutting, longitudinal cutting and stripping like banana peel form;
The positioning clip can be fixed cable, determine the stripping length;
Gradually regulate the depth, the maximum rotating diameter of 130 mm;
The blade can be adjusted maximum depth 2 mm,
Adjustment knob calibration for 0-0.9 mm,
Each scale feed is 0.1 mm;
Longitudinal cutting start position can be precisely aligned.
Can reduce the rotation in the limited space;
The perfect ring cutting;
Below the surface without incision.
Note: not suitable for live working
Standard configuration:
HLS cable stripping: AV6410
- fixed folder: AV6411
And silicone lubricant: AG1013
Ben: AB6400 toolbox